If you build it, they will come. And if you 3D-print it, they will come faster, cheaper and more sustainably.
We live in an era of overpopulation and mass housing shortages. Yet we also live in a time of phenomenal digital innovation. On the one hand we have major crises affecting the health, liberty and happiness of billions of people. But look at the other hand, where we have potential for life-changing technological breakthroughs at a rate never before seen on this planet.
Our challenges are vast, but our capabilities to produce solutions are even greater. In the future, we will remember this moment in time as a pivotal one. It is now — not tomorrow, and certainly not five years from now — when technology and innovation are disrupting multiple major industries, including those of housing and construction, at breathless and breakneck speed.
Innovators around the world are hard at work to change the way we design, build and produce our homes, and all of this will result in massive change to the housing status quo. Harnessing the revolutionary power of 3D printing, companies from Russia to China, the U.S. and the Netherlands have already proven that not only can a home be 3D-printed, it can be done cheaply, efficiently and easily.
Here are just a few ways 3D printing is already transforming the way we live.
In March 2017, Apis Cor, 3D-printing specialists with offices in Russia and San Francisco, announced they had produced a 3D-printed home in just 24 hours. That means that from the time you drank your coffee yesterday to the time you sat down for cereal this morning, they produced the self-bearing walls, partitions and building envelopes of an entire home, installed it on site and added the roof and interior finishings. It happened in the dead of winter in a tiny Russian town named Stupino, and it was done using Apis Cor’s on-site printer, which means that the massive cost and logistical hurdle of transporting parts and building materials from factories to a home site was almost entirely eliminated.
Think about the possibilities: You select the site where you want to build your home, Apis Cor brings in their 4.5-meter-long printer, the raw materials are set up and within one single day, your home is printed and ready for you. Compare that to the traditional six- or seven-month construction time the industry is used to, and you’ll begin to understand the scope of potential disruption.
The speed of technological innovation here is also exponential and mind-blowing; just one year before Apis Cor’s breakthrough, we in the 3D-printing industry were marveling over Chinese construction company HuaShang Tengda, who set their own record by 3D-printing a two-story home in a month and a half. Consider that, for a moment: This industry is moving so quickly that construction time has been slashed from 45 days to 24 mere hours in the span of a single year.
Housing prices in America have skyrocketed over the past 50 years, with the average price for a home now surpassing $200,000. And remember, that’s just the average — if you live on the East or West Coast, chances are you’re going to be shelling out something closer to the half-million dollar mark (or more!).
According to a report from the McKinsey Global Institute, a full one-third of people who live in cities will find decent housing out of their reach due to cost by the year 2025. And construction costs are the primary barrier — the report also states that it will take between $9 trillion and $11 trillion just to build the necessary houses to flip that supply-demand ratio and make housing affordable in that time.
Of course, that’s taking only traditional methods of construction into account. But Apis Cor’s 24-hour home was made for around $10,000. HuaSheng Tenga’s homes were made with only 40 percent of the materials traditional construction usually requires, in 30 percent of the time. That represents massive savings in labor and material costs. And these companies aren’t alone — dozens of other firms are exploring cheaper and less complicated methods for building the roofs we all need over our heads, and slashing prices in the process.
New Story, a Silicon Valley-based nonprofit that builds housing in the developing world, just unveiled a new 3D printer at SXSW that can print a house in less than a day for $4,000. DUS Architects — a Dutch architecture studio that has been 3D-printing houses since 2012 — has unveiled the KamerMaker, a huge 3D printer that can build using local recycled materials. This slashes transport, material and manufacturing costs, all driving down costs.
The bottom line
What’s so revolutionary about 3D printing is that its potential is limited only by our imaginations. If the past few years have taught us anything about this industry, it’s that barriers of size, scope and material do not apply to the potential that 3D printing brings to the manufacturing market. From cars to food, to the houses we live in, the industry isn’t just gearing up for a shakeup. It’s in the throes of it already, because change is happening now.